Product Detail:-
27,35,45, Double Sided Rotary Tableting Machine Azesto Press I

MACHINE CONSTRUCTION:-

Compact Design
The powder circulating bend fitted to the feed frame keeps the powder spilling to an absolute minimum. This is noteworthy since the machine is capable of compressing approximately 50,400 tablet per hour.

Drive Configuration The turret is driven by a precise phosphorus-bronze worm Fitted to a bearing mounted worm shaft which is driven by A “V” belt and variable speed pulley mounted on the Motor shaft.

Cam Track Design The Machine incorporates the latest cam track design having smooth cam angles. Smooth cam angles improve punch Travel / which in turn / facilitate tablet ejection and reduce punch head wear extended through lubrication of the cam tracks.

Cleanability The tableting zone has been designed as per the stringent cGMP norms. The main features of the tableting zone include.

Maintenance Major controls and the one-shot lubrication system are easily accessed through the hinged front and rear panels. Since there are no moving parts in this area these are not interlocked, therefore adjustments can be carried out safely while the machine is in operation.

Lubrication All major lubrication points are served by the one-shot lubrication system. Oil cups are provided wherever continuous lubrication is required.

Overload and Pressure Release Effectively, the safety valve of the machine, this is fitted to the lower pressure roll. The overload pressure release should always be set to relieve the pressure with minimum effort consistent with the diameter and hardness of the tablets being made. Adjustments are easily made from the lower cabinet. Serious damage to both the machine and the punches can be prevented through proper use and maintenance of this system.

Motor Overload Any appreciable motor overload that may occur due to tight punches etc. is indicated on an ammeter fitted to the control panel. The average amperage in normal running (tableting) condition is to be noted. Any increase in this average should be immediately investigated.

Technical Specification:-

Type		AZP3 DR-27 “D”	AZP3 DR-35 “B”	AZP3 DR-45 “BB”
		Double Sided Rotary	Double Sided Rotary	Double Sided Rotary
Type of Tooling		“D”	“B”	“BB”
No. of Station		27 Stn.	35 Stn.	45 Stn.
Max. operating pressure		10 Ton	6.5 Ton	6.5 Ton
Max. Tablet Diameter		23 mm	16 mm	11 mm
Max. Depth of fill		20.5 mm	17.5 mm	17.5 mm
Upper Punch Penetration		3 – 8 mm	3 – 8 mm	3 – 8 mm
Maximum Turret RPM		50	50	50
*Output Tab. / Hour		48000 to 162000	63000 to 210000	81000 to 27000
Electric Motor – ACVF		7.5 Hp / 1440 RPM / 3 PH.
	*Depending upon the characteristics of material and shape & size of tablets

FEATURES:-

Available in cG.M.P. Model.
AC variable frequency drive for main motor.
Gravity feeding provided with the machine.
Outside controls for tablet parameters weight and Hardness.
Lower punch seal is provided.
Auto lubrication system.
Upper punch lubrication with separate oil cup.
Digital Counter for Tablet Output, Rate of Production & Turret RPM.
Contact parts i.e. hopper, discharge chute & dust extractor nozzles are S.S 316.
Adjustable upper punch penetration.
Guard with interlock- with transparent Acrylic frameless guards.
Inching system for machine.
Reverse direction motion protection is provided to avoid major accident.
Antivibration mounting provided Hence no foundation required.
Higher turret speed maximum 50 RPM gives output than standard machine.
Lower punch lubrication provided.
Aluminum covers for rotor teeth.